01. Check the air pressure frequently
The tire pressure must meet the standard. Check the pressure to prevent abnormal pressure from causing damage to the tire. Low pressure will cause the tire to deform greatly, the tire temperature will rise sharply, and the carcass will become soft, causing abnormal wear of the tire and loose and broken cords in the tire. , Shoulder crack or carcass crushed. Excessive air pressure will increase the force of the tire carcass cord and decrease the anti-flex performance, resulting in crown wear, crown burst, and abnormal tread wear. At the same time, combined tires will cause overload damage to single tires due to different air pressures.
02.Check tire temperature frequently
To keep the tire temperature normal, especially in summer driving, pay special attention to avoid the increase in internal pressure of the tire due to the increase in the tire temperature, and the increase in fatigue caused by the tire burst.
03. Dig stones frequently
The car mainly checks and removes the pebbles and debris attached to the tire treads to prevent the gravel from squeezing the bottom of the groove during the tire operation and stab the base rubber. Under the action of flexing, the rubber will extend the crack along the wound.
04. Check wear and tear
Make sure that the remaining tread depth of the tire is within the recommended depth. Once the wear mark on the bottom of the tire groove is found, the tire should be replaced immediately to prevent danger. At the same time, frequent inspections should be performed on the sidewall of the tire. If the sidewall is abnormally raised or severely scratched, it must be stopped to prevent the damage from expanding and causing serious accidents.
05.Screw the hole
If possible, try to fill the small punctures on the tread rubber found during the inspection with raw rubber to prevent sand from intruding into the cord layer and causing punctures.